When you have successfully connected your Wi-Fi Router to the internet, you can use this device as the primary node to start setting up your mesh network.
Two quick Mesh networking methods:
Method1: Wireless Networking: First, press and hold the WPS button on the primary node for 1 seconds. Then, press and hold the WPS button on the secondary node for 1 seconds.
During the networking process, the LED on the primary node blinks blue, and the LED on the secondary node blinks green. Once networking is completed, both LEDs will turn to a solid blue.
Method 2: Wired Networking: Connect one end of an Ethernet cable to the LAN port of the primary node, and the other end to the WAN port of the secondary node. During the networking process, the LED on the primary node blinks blue, and the LED on the secondary node blinks green. Once networking is completed, both LEDs will turn to a solid blue.
If you unplug the Ethernet cable of the secondary node (which is already connected to the mesh network), the mesh network will still continue to function.
Add a new secondary node via the webUI
Ensure the Wi-Fi Router acting as the secondary node is powered on and working properly.
1) Log in to the web user interface (UI) of your Wi-Fi Router, and go to Advanced > Wi-Fi > EasyMesh. (Refer to "How can I access the Home page?" in the Basic Settings module.)
2) Click Add a Mesh node.
