Position your PlayCube with one of the following methods:
1. Front: Place the PlayCube on a table in front of the screen. This is the most common way to position the PlayCube for quick setup and portability.
2. Rear: Place the PlayCube on a table behind the screen. A special rear projector screen is required.
3. Front Ceiling: Mount the PlayCube upside-down in front of the screen. A ceiling/wall mount kit is required.
4. Rear Ceiling: Mount the PlayCube upside-down from behind the screen. A special rear projector screen and a ceiling/wall mount kit are required.
Note:
After turning on the PlayCube, press the Projector Settings button on top of the PlayCube, then go to Advanced “Settings” > “Projector”> “Advanced Settings” > “Projection Mode” to select a setting.
It is unnecessary to tilt the PlayCube toward the projection surface. Your PlayCube has autofocus and auto keystone correction to create a well-sized and clear image.
For more control over projector height, you can place it on a tripod (sold separately).
The distance between the projector lens and the screen determines the projector screen size.
