A blurry image is usually caused by incorrect focus. Please follow these steps in order:
1. Auto Focus: Go to “Settings” > “Projector settings” > “Start auto-focus”. The projector will automatically adjust the focus until the image becomes clear.
2. Manual Fine-Tuning: If the image is still not sharp after auto focus, go to “Settings” > “Projector settings” > “Image Correction” > “Manual Focus”. Use the left/right directional keys on the remote to fine-tune until text edges appear crisp and clear.
3. Lens Cleaning: If the issue persists, inspect the lens for dust, oil smudges, or fingerprints. Gently wipe the lens surface with a soft, dry lens cloth (avoid applying pressure), then retry the focus steps above.
